Unit Originally Created By:
Karen Dalton-Wemp
Multi-View Drawings
Part of Course: Engineering Design I Model
Unit Overview / Details
This unit will provide learning activities to apply two or more views to describe an object as a working engineering drawing. Both traditional board drafting and CADD techniques are presented.
Instructional Days
- Classroom
- 35 Hours
Content / Concepts
- commands and concepts necessary for producing drawings through traditional or computer-aided means
- orthographic projection process for multiview drawings
- techniques for viewing objects
- using geometric construction in design drawings
- apply pictorial drawings derived from orthographic multiview drawings and sketches and from a solid modeler
CTE Standards
- California Career and Technical Education Standards: 26
- California Academic Content Standards: Reinforced: 5
- All Standards
- Full Details
- Industries and Pathways:
- Engineering & Design
Lessons in this Unit
In this lesson students will be able to develop a fully dimensioned multi-view drawing from a handout. They will develop the drawing given two of the views along with an Isometric. They are required to create the third view and dimension all three views, using AutoCAD software and will understand the use of multi-view applications in the Engineering Design industry.
- 2 Class Periods - Each Period
- 55 Minutes
In this lesson students will be able to develop a fully dimensioned multi-view drawing from a isometric CAD drawing and paper handout. They will develop the drawing given only a non dimensioned Isometric handout / CAD file. They are required to create the 3rd view and dimension all three views, using AutoCAD software.
- 2 Class Periods - Each Period
- 55 Minutes
Students will create a basic 3 view drawing (front, top, right side views) using 1/4" graph paper. These views will be derived from a Pictorial drawing (isometric).
- Total Lesson Time
- 55 - 75 Minutes
- Label
- 0 Minutes
This lesson is an introduction to Multiviews and Orthographic Projection. Students will work w/ Normal Surfaces before moving on to more complex multiviews.
- Entire Lesson
- 5 Hours
- Introduction
- 10 Minutes
- Multiview/Normal Surfaces .ppt
- 45 Minutes
- Missing Lines & Views .ppt
- 25 Minutes
- guided practice
- 25 Minutes
- CAD modeling
- 90 Minutes
- Review
- 20 Minutes
- Quiz & review
- 45 Minutes
This lesson builds on Multiviews 1 and allows more time for students to work on their drawings which include inclined, oblique and rounded surfaces
- Entire time
- 5 Hours
- Escher-hooks/set
- 5 Minutes
- Multiviews/Inclined, Oblique & Rounded
- 35 Minutes
- Missing Lines & Views worksheets
- 25 Minutes
- CAD Modeling
- 130 Minutes
- Hand sketching multiviews
- 20 Minutes
- Review
- 20 Minutes
- Quiz & Review
- 45 Minutes
