Intro to Ag Mechanics Model
Units:
- FFA Issues and Opportunities
- Supervised Agricultural Experiences
- The California Agricultural Record Book
- Careers in Agricultural Mechanics
- Personal and Group Safety
- Rope Work & Load Securing
- Basic Agricultural Woodworking
- Calculating Board Feet
- Fasteners Used in Woodworking
- Cutting and Shaping Wood
- Redwood Planter Box Project
- Anticipatory Sets or Hooks
- What do these projects have in common?
- Laying out the planter box project.
- Demonstration- Cutting Down the 1"X12" with the table saw and radial arm saw
- Students cutting down their 1" X 12" with the table saw and radial arm saw
- Demonstration- Making their Dado and rabbet joint
- Students making their dado and rabbet joints
- Demonstration- Assembling your Redwood Planter Box
- Students assembling their Redwood Planter Boxes
- Demonstration- Drilling your Drainage Holes
- Student drilling their drainage holes
- Demonstration- Finishing your project
- Students finishing their redwood planter boxes
- Closure-Summary
- Push Stick Project
- Book End Project
- Basic Agricultural Electricity and Wiring
- Plumbing Systems in Agriculture
- Agricultural Cold/Hot Metal Processes
- Agricultural Concrete and Masonry Practices
- Oxy-fuel Cutting and Welding
- Electric Arc Welding Processes
- Small Engines
- Land Measurement
- Projects
Tags
Activity Industry Sector
Agriculture & Natural Resources
Activity Originally Created By:
Mike Mederos
Demonstration- Cutting Down the 1"X12" with the table saw and radial arm saw
Part of Lesson Plan: Redwood Planter Box Project
Activity Overview / Details
2. Adjust table saw rip fence so that it measures 5 ½"
from the fence to the inside of the saw blade.
3. Rip the 1" X 12"
4. On the side that measures 5 ½", measure and mark it
at 22", Using the Radial arm saw cut the board in two.
5. On the other piece of wood, make sure that it is 5
½" wide, if not use the planer to shave off the excess wood.
( Make sure that you use a test piece of wood on the planer before
you plane your piece of redwood).
6. Mark out 22" on this piece and cut it with the radial arm
saw.
7. Mark out 4 7/8" on your piece of wood leftover and cut it
with the radial arm saw.
8. Mark out 4 7/8" on your piece of wood leftover and cut it
with the radial arm saw.
