Automotive Technology 1 and 2 Model
Units:
- General Shop Safety Practices
- Classroom/Lab Management Procedures
- Tools, Equipment Identification and Utilization
- **Measurements and Mathematics (updated) By Michael Drouin
- **Metric system to the US standard system conversions (updated) by James P. Lane
- **Using taps to cut metric and standard threads (updated) by Ramon C. Iniguez
- **Broken Bolt Extraction Methods Part 1 (updated) by Robert Thayer
- **Broken Bolt Extraction Methods Part 2 (updated) by Robert Thayer
- **Hand tools and hand tool safety (updated) by Curt Erales
- Certification and Licensing
- Vehicle Maintenance Procedures and Documentation
- Fasteners, Gaskets, & Seals
- Engine Fundamentals
- **Engine Fundamentals (updated) by David Espinoza
- **Remove and Replace a Valve (updated) by Steve Nagle
- **Starting System Fundamentals (updated) by Russell Granger
- **Charging System Fundamentals (updated) by Russell Granger
- **Ingredients to Internal Combustion (updated) by Thomas Dougherty
- **Ingredient 1: Fuel (updated) by Thomas Dougherty
- **Bore & Stroke (updated) by John Potter
- **The 4 strokes of an engine (updated) by Curt Erales
- **Ingredient 2: Compression (updated) by Thomas Dougherty
- **Ingredient 3: Ignition (updated) by Thomas Dougherty
- Ignition System Service (updated) by Curt Erales
- Engine Cooling and Lubrication
- Fuel System Fundamentals
- Fundamentals of Electrical and Electronic Systems
- **Principles of Electricity (updated) by Jeff Gillming
- **Ohm's Law (updated) By Richie Rizzonelli
- **Circuits (updated) By Richie Rizzonelli
- **Use of a Multimeter (updated) By Michael Drouin
- **Wiring diagram (updated) By Michael Drouin
- **Operation and Testing of Relays (updated) by Mike Monahan
- **Fabricate a simple electrical switch (updated) by Ramon C. Iniguez
- **Introduction to Batteries (updated) By Eli Jaramillo
- Engine Performance Fundamentals
- **Ignition systems types (updated) by Sergio Marquez
- **Fuel system delivery (updated) by Sergio Marquez
- **Test Lights (updated) by Michael Fleming
- **Vacuum Testing / Driveability (updated) by Michael Fleming
- **Compression Testing (updated) by Michael Fleming
- **Catalytic Converter (updated) by Richard Williams
- **Introduction to the Exhaust Gas Recycling Valve and Systems (updated) by Richard Williams
- Chemical, Mechanical, Hydraulic and Physical Principles
- Brake System Fundamentals
- Fundamentals of Steering, Suspension, Tires, Wheels
- **Tire size By Michael Drouin
- **Balancing the Tire (updated) by Steve Nagle
- **Lift Safety and Vehicle Lifting (updated) by Robin Coyne
- **Wheel removal and replacement (updated) by Robin Coyne
- **Tire tread wear diagnosis (updated) by Jeff Gillming
- **Alignment Angles (updated) by Russell Granger
- **Steering Fundamentals (updated) by Russell Granger
- **Suspension Fundamentals (updated) by Russell Granger
- **Shock & Strut Inspection & Service (updated) by Dennis Johnson
- **Tire Mounting Part 1 (updated) by Robert Thayer
- **Tire Mounting Part 2 (updated) by Robert Thayer
- Fundamentals of Transmissions and Drivetrain
- Green Concepts
- HVAC (Heating, Ventilation and Air Conditioning)
Tags
Activity Originally Created By:
MaryRose Lovgren
Presentation
Part of Lesson Plan: **Introduction to Shop Safety (Updated) By Ken Hamel
Activity Overview / Details
At this point I begin the presentation. The Power Point is over 100 images long and leaves a lot of room for class discussion. Since this is a long presentation that properly addressed should take several days, the teacher should employ different techniques in maintaining interest. Giving the students the chance to tell stories related to the topic as well as adding stories of your own will help to keep the students engaged in the lesson. The Power Point uses many graphic and humorous slides to help with interest. The graphic slides are not there for the sole purpose of shock value, but to help drive home the importance of safety in the automotive workplace.
This portion of the presentation should take a couple of days at least. The class can pick up the following day where they left off. The instructor may choose to create and administer small quizzes throughout in order to keep interest up. Each class has a different personality and the instructor should tailor the information in a manner that they feel will be best cover the information.
Materials / Resource
Safety
[
Download
]
Safety lists for Automotive




