Automotive Technology 1 and 2 Model

by CTE Online Admin

This introductory automotive course is designed to provide basic training to students and teach the necessary skills, and knowledge about the internal combustion engine, basic car systems, and careers in the automotive service industry. Upon completion, students will have sufficient background to make minor repairs and adjustments on the various systems of the modern automobile, using up-to-date equipment and tools.

Program Information
Industries / Pathways
  • Transportation
    • Systems Diagnostics, Service, and Repair
Grade Levels
  • 9
  • 10
  • 11
  • 12
CTE Certification Elements
Course Level
Introductory
Total Hours
180
Course Length
2 Semesters
State Certified
No
Board Approval
No
Labor Market Demand
Medium
Is this course industry certified?
No
Course Type
Career-Technical Preparation
CSU/UC Approval
No

O*NET Occupations

Occupation Name Occupation Code
Automotive Master Mechanics 49-3023.01
Transportation Vehicle, Equipment and Systems Inspectors, Except Aviation 53-6051.07
Electronic Equipment Installers and Repairers, Motor Vehicles 49-2096.00
Automotive Service Technicians and Mechanics 49-3023.00
Tire Repairers and Changers 49-3093.00
Automotive Specialty Technicians 49-3023.02
Electrical and Electronics Installers and Repairers, Transportation Equipment 49-2093.00

Related Occupations

Installation, Maintenance, and Repair Occupations
Vehicle and Mobile Equipment Mechanics, Installers, and Repairers
Automotive Technicians and Repairers

Electrical and Electronics Installers and Repairers, Transportation Equipment - 49-2093.00

Electronic Equipment Installers and Repairers, Motor Vehicles - 49-2096.00

Tire Repairers and Changers - 49-3093.00

Standards
California's 2008 CTE Standards: 77
California Academic Content Standards: 49
Units

General Shop Safety Practices

The lessons in this unit include shop safety, tool safety, and fire safety.

Classroom/Lab
5 Days
Lesson Plans

Classroom/Lab Management Procedures

The lessons in this unit include familiarizing all students with shop procedures, equipment locations, work ethics, State laws and regulations for automotive shops, proper record keeping, safety equipment locations, and proper and handling of safety equipment.

Classroom/Lab
6 Days
Lesson Plans

Tools, Equipment Identification and Utilization

The lessons in this unit include identifying common automotive hand tools, how to properly and safely use the tools, and how to select the proper tool for a given job. It will also cove the proper care, maintenance, and storage of the tools. This unit will contain lessons that cover power tools and hand tools and the advantages and disadvantages of certain tools. All lessons will include safety and safety procedures for tool utilization.

Classroom/Lab
9 Days
Lesson Plans

Certification and Licensing

The lessons in this unit include State Licensing, Bureau of Automotive Repair Expectations, and ASE certification process

Classroom/Lab
1 Day
Lesson Plans

Vehicle Maintenance Procedures and Documentation

The lessons in this unit include researching manufacturers' repair and maintenance schedules, procedures and practices, Proper maintenance procedures documentation in accordance with applicable rules, laws, and regulations (BAR, OSHA, CARB), Reference books, technical service bulletins, and other electronic and print to diagnose and repair vehicles, and compile a repair order, including customer information, description of repairs, and billing information

Classroom/Lab
8 Days
Lesson Plans

Fasteners, Gaskets, & Seals

The lessons in this unit include various fasteners, gaskets, and seals. Lessons will also include standard and metric fasteners.

Classroom/Lab
4 Days
Lesson Plans

Engine Cooling and Lubrication

The lessons in this unit include the basic function and operation of the cooling and lubrication system. They will also include the inspection, testing, and repairs of these systems.

Classroom/Lab
6 Days
Lesson Plans

Fuel System Fundamentals

Students learn how the ratio of air and fuel is carefully controlled in internal combustion engines.

Classroom/Lab
1 Day
Lesson Plans

Fundamentals of Electrical and Electronic Systems

The lessons in this unit includes explaining the principles of electricity, describing the action of basic electric circuits, and comparing voltage, current, and resistance. Describing the principles of magnetism and magnetic fields and identifying basic electric and electronic terms and components will be included.

Classroom/Lab
14 Days
Lesson Plans

Engine Performance Fundamentals

The lessons in this unit include determining engine size measurements based on
bore, stroke, displacement, and number of cylinders. being able to explain engine compression ratio and how it affects engine performance, explain engine torque and horsepower ratings, describe the different methods used to measure and rate engine performance, and explain volumetric efficiency, thermal efficiency, mechanical efficiency, and total engine workings. All lessons include safe work practices.

Classroom/Lab
25 Days
Lesson Plans

Chemical, Mechanical, Hydraulic and Physical Principles

The lessons in this unit include how students will demonstrate the basic concepts of automotive physics.

Classroom/Lab
2 Days
Lesson Plans

Brake System Fundamentals

The lessons in this unit include the fundamentals of both drum and disc brake systems, inspection and measuring the brake system which includes mechanical and the hydraulic portion of the brake system. Also contains servicing of the brake systems, utilization of brake measuring tools and using basic mathematics to determine if parts can be reused or need to be replaced.

Classroom/Lab
7 Days
Lesson Plans

Fundamentals of Steering, Suspension, Tires, Wheels

The lessons in this unit include identifying the major parts of a suspension system, describing the basic function of each suspension system component, explaining the operation of the four common types of springs, comparing the various types of suspension systems. Tire size and dimensions, steering angles including camber, caster, toe, toe-in & toe-out on turns, and SAI will be included.

Classroom/Lab
10 Days
Lesson Plans

Fundamentals of Transmissions and Drivetrain

The lessons in this unit include fundamentals and some servicing of automatic and manual transmissions, differentials, shift linkages, and constant velocity axle inspection and service.

Classroom/Lab
12 Days

Green Concepts

The lessons in this unit include an introduction to "Green Technology", which will include hybrids, electric, hydrogen fuel cell, photovoltaic & bio diesel applications

Classroom/Lab
10 Days
Lesson Plans

HVAC (Heating, Ventilation and Air Conditioning)

The lessons in this unit include the fundamentals of automotive heating and air conditioning systems and the inspection, testing, and maintenance of the systems.

Classroom/Lab
5 Days
Lesson Plans